Home » STEM Stations

Tag: STEM Stations

engineering-in-the-classroom-examples

Engineering in the Classroom Examples [STEM in Action Series][ep.168]

Engineering in the Classroom Examples [STEM in Action Series] [ep.168]

Check out the full episode about Engineering in the Classroom Examples:

Subscribe to the podcast HERE on your favorite podcasting platform.

Have a STEM question? Leave a voice message for the podcast!

Listen to this episode on YouTube here:

Episode Summary

We are continuing our STEM in Action series with engineering in the classroom examples. In this episode, I will be sharing how to incorporate the engineering aspect of STEM into your classroom, my favorite tools for engineering lessons, and examples of different types of engineering lessons and projects you can incorporate into your classroom.

 

In this episode, you’ll learn:

  • Standards to focus on for engineering lessons
  • Top Tools to Use
  • Lesson Ideas that use science as the main focus; project, station & 1 day lesson

Resources Mentioned:

Some items are linked to my Amazon Affiliate account. When you purchase through my link, there is no added cost to you, but I receive a small commission in return.

Episode Transcript: 

What are some ways to effectively plan and incorporate engineering into your STEM lessons? I feel like the engineering side might be one of the easiest, but there are some tips and tricks that I like to use when really focusing on the building aspect. We are continuing our STEM in Action series, which we kicked off with guest experts in the field to help connect different elements of STEM. For the second half of this series, I'm sharing my insights and some practical lessons that you can implement in your classroom.

Welcome to the Elementary STEM Coach Podcast, a show that will help you with lesson ideas, systems, and actionable tips to apply to your classroom. I am your host, Naomi Meredith, a former classroom teacher turned current STEM teacher and coach. With over a decade of experience teaching and a master's degree in STEM leadership, I am here to coach you throughout the year to help you gain back more time to create innovative experiences for your students. Grab your earbuds, and let's get started.

In the last episode, I focused on technology. The one before that, I focused on science. If you haven't listened to those episodes, go back and check them out. You don't have to listen to them before this one, no worries at all. But we are going to get into the engineering side. As the summer might be in full swing, or maybe it's winding down for you and you are thinking about back to school, you might be wondering how you can really focus on what you need to do for your classroom. I have my on-demand STEM Teacher 101 course where I walk you through the whole process of setting up your classroom, what types of lesson plans you can have in your space, and then some other things to think about like grouping students and having them collaborate effectively.

Now, based on requests from you, I am splitting up the whole STEM Teacher 101 course. You can take it as a whole, or I'm breaking apart the lessons and adding updates as I go, so you can focus on something specific. The course is more effective if you do it on your own, but if there are certain things you need to focus on, like how to set up your classroom, what type of checklist to use as a teacher before the kids even arrive, all of those segmented lessons are being uploaded to my TPT shop, Teachers Pay Teachers shop, Naomi Meredith. You can go and check that out. At the time of this recording, all of the lessons in module two are up in my TPT shop. This is a great way for you to gradually get into the course or just pay as you go, and it's a great way to focus on the lessons you're looking for.

Alright, when it comes to engineering, I feel like it might be one of the easiest aspects to think about in STEM. I want you to keep in mind, though, that we're not isolating all the letters in STEM, where you're only doing engineering or only doing technology. You’re really focusing on all of it, but maybe highlighting one more than the others. Think of each episode as the capital letter in STEM, with the rest being lowercase, so in this episode, E is capitalized.

If you're wondering why I'm not doing an art lesson, there is always an element of art in STEM. You're always thinking about creativity. In the business world, they call it STEM, which is why I use STEM, but I'm not ignoring the art piece. Trust me, I'm all about making things look nice and being creative.

In this episode, like the others on science and technology, I'm going to talk through the standards to think about, my top favorite tools, and some lesson plan ideas. If you're thinking STEM doesn't have any standards, especially engineering, it actually does. In fact, your science standards likely include building a model, creating a solution, or building to solve a problem. Those words are in your science standards for a reason. Some science standards lend themselves well to experiments, while others are better for an engineering design process challenge to build and solve a problem. Really look at those keywords in your standards.

My other favorite standards are the Next Generation Science Standards that specifically talk about the engineering design process. It’s a process real engineers use to build and solve problems and go through the iteration process. It’s different from the scientific method but equally important. I have a poster that supports this process, which I blew up at Walgreens. It was inexpensive, and you can hang it up all year. I also display it digitally. Familiarize yourself with the engineering design process. It’s important and helps design challenges, whether they are multi-day or one-day challenges.

Regarding tools, here are my favorites for reusable items and maker space. For cardboard, I love the thin cardboard from cereal and snack boxes. I collect it constantly. My teacher honey saves it for me, and I cut it up into pieces to force students to build creatively. I also store it in a drawer in my home office. For thicker cardboard like Amazon boxes, I recommend investing in cardboard saws like those from MakeDo. Be cautious with these, especially for younger students. For tape, I prefer masking tape. I limit its use by making baby tape rolls wrapped around a Popsicle stick. I haven’t found a favorite brand, so I look for the cheapest options on Amazon or at Dollar Tree.

For hot glue guns, choose low-temperature ones. Ensure you use the corresponding low-temperature sticks to avoid clogging issues. I use these from second grade and up or third grade and up. I have a poster with instructions, which you can find on my YouTube channel.

For consumables, I love using math manipulatives. I collect old ones from teacher hallways at the end or beginning of the school year. I also found Unifix cube alternatives at Target’s dollar spot. These are great for various STEM activities.

For lesson ideas, if you want to focus on engineering as your main goal, here are some suggestions. For a multi-day project, consider my STEM Survival Camp. In episode four of this podcast, I discuss all six challenges. The build a shelter challenge is popular, where students create a shelter to withstand elements like wind, water, and snow.

For STEM stations, use my engineer inspiration boards. These are low-prep, themed activities that students can build using any materials on hand. They are perfect for last-minute lessons or fast finishers.

For a one-day lesson, consider the paper plate marble coaster. It’s a fun project where students design a coaster using flimsy paper plates. They learn about roller coaster design principles and use cardboard building techniques.

In summary, today we talked about the standards for engineering in STEM, recommended tools, and lesson ideas for multi-day projects, STEM stations, and one-day lessons. You can find all lesson-specific resources in my TPT shop, Naomi Meredith. Feel free to reach out to me via email or Instagram for links or questions. Can't wait to hang out with you next week for the last episode in this series, where we'll talk about all things math.

Thank you for listening to today's episode of the Elementary STEM Coach Podcast. Connect with me on Instagram at NaomiMeredith_ or via email at elementarystemcoachpodcast@gmail.com. Check out my website, NaomiMeredith.com, for show notes and K-5 STEM resources. Reach out with any questions or ideas for episodes. Talk to you soon!

 

 

Related Episodes/Blog Posts:

Connect with Naomi Meredith:

 

More About your host, Naomi Meredith

Naomi Meredith is an online K-5 STEM Coach in Colorado supporting elementary teachers world-wide navigate the best practices, strategies and tools out there. With over a decade of experience teaching, 5 years teaching elementary STEM, along with a M.Ed. in STEM Leadership and STEM Certificate, Naomi helps teachers world-wide to navigate best practices, strategies and tools out there. 

She offers a variety of tools to help teachers feel successful teaching STEM to their elementary students through lesson plans, online courses, coaching and speaking events.

She truly believes that any teacher out there can learn how to use STEM, innovation and hands-on learning in their classrooms effectively. She can’t wait to connect with you and be your guide!

More About The Elementary STEM Coach Podcast

Are you tired of scrolling online for your next great STEM lesson? Do you feel like there is no time to plan, research and test meaningful STEM lessons, so you throw together a hands-on activity and hope that it works? What systems and routines should you set in place to help students be creative, critically think, and collaborate? 

The Elementary STEM Coach is a podcast for K-5 STEM teachers, classroom teachers, GT specialists, and homeschool parents looking for actionable STEM solutions. Each week, Naomi Meredith will share tools, resources and lesson ideas that are actionable in your classroom and create highly engaging experiences with your students. You’ll learn systems and routines that will create control in the chaos and that will keep you organized all year long. 

Your mindless scrolling days are over! Your new STEM-best friend is now here in your ear buds!

science-used-in-stem

How is Science Used in STEM? [STEM in Action Series] [ep.166]

How is Science Used in STEM? [STEM in Action Series] [ep.166]

Check out the full episode on How Science is Used in STEM:  

 

Subscribe to the podcast HERE on your favorite podcasting platform.

Have a STEM question? Leave a voice message for the podcast!

Listen to the audio here on YouTube:

Episode Summary

Have you been thinking of some ways to purposefully plan and add science into your STEM lessons? In today’s episode, we are continuing with our STEM into Action series, with me sharing my insights and some practical lessons that answer the question, “How is science used in STEM?”

 

In this episode, you’ll learn:

  • Standards to focus on for science lessons
  • Top Tools to Use
  • Lesson Ideas that use science as the main focus; project, station & 1 day lesson

Resources Mentioned:

Some items are linked to my Amazon Affiliate account. When you purchase through my link, there is no added cost to you, but I receive a small commission in return.

Episode Transcript: 

What are some ways to purposefully plan and effectively add science into your STEM lessons? We are continuing our STEM in Action series, where we kicked it off with guest experts in the field to help connect different elements of STEM and really focus on what STEM means and can look like in different capacities. For the second half of the series, I will be sharing my insights and some practical lessons that you can implement in your classroom. The next four episodes will focus on each letter of STEM, and these will all connect together and give you some practical ideas that you are really going to enjoy.

Welcome to the Elementary STEM Coach Podcast, a show that will help you with lesson ideas, systems, and actionable tips to apply to your classroom. I am your host, Naomi Meredith, a former classroom teacher turned current STEM teacher and coach. With over a decade of experience teaching and a master's degree in STEM leadership, I am here to coach you throughout the year to help you gain back more time to create innovative experiences for your students.

Grab your earbuds and let's get started. At the time of this recording, we are right in the middle of summer. Maybe some of you have been on summer break for a little while, or maybe some of you are just starting. Wherever you are, I get it. I understand. June has been a very busy month for me again. You probably know where I was last time in June, and this year has been very busy as well. I understand the busyness and all the cool things that you can do in summer.

Having on-demand trainings can be extremely helpful. If you're on the go or traveling, one of my favorite things to do is listen to trainings on airplanes or while using cardio machines at the hotel. I understand, like I said, and so I have some on-the-go trainings for you that are perfect for summertime. You don't have to attend live, but they can really help support your STEM instruction.

I have my STEM Teacher 101 course. So if you are getting started in STEM and don't know where to begin and want someone to tell you what to do before you even set up all the lessons, I invite you to join my STEM Teacher 101 course. That is a great place to start.

If you're looking for strategies on specific lesson planning or maybe you're thinking, “Oh, I want to host my school-wide video news this year,” or “I would love to host a STEM career day,” I have some workshops for you. All of those workshops are two hours, come with tons of resources, and they were live at the time. So I did have teachers who were there for the live trainings, except the STEM Career Day is 100% on demand.

However, you can hear that interaction and get access to all those resources right there. And again, be on your way with what you are looking for. You can find all of that linked in the show notes, or if you even just head to my website, NaomiMeredith.com, you'll see tabs that go along with the things that I'm talking about. That’s a great way to spend some time with me this summer, even when you are on the go.

When you're thinking about implementing science, the format of these next four lessons is going to have the same structure. So you know what to listen for and what to really think about. We are going to be talking about standards—what standards should you use when thinking about that part of STEM. Today we are talking about science. Then I’m going to share my top tools that I love using when it relates to that letter in STEM. Finally, I will give you some lesson ideas that are mostly focused on science.

Of course, they encompass all sorts of things cross-curricular, which is how you should be planning anyway. I'm very big on that. That is going to be the structure for these episodes. When it comes to standards, when you are really focusing on the science part of STEM, your state most likely has some sort of science standards that you should be focusing on. I like to base my lessons on the NGSS, the Next Generation Science Standards. Those are more widely used nationwide. Here in Colorado, some standards are based on the NGSS, but I like to teach with the NGSS so it's more universal. However, you need to look at the standards specific to your state and what you should be teaching at that grade level.

In the last episode with Nicole Aschen, episode 165, we touched on this as well. If you are limited on time with teaching, which we all are, but a lot of you teach one-day lessons, why not make it more purposeful by bouncing off what classroom teachers are doing and teaching with those standards? I was spoiled at times where I had more time with kids, but I always planned with standards no matter what. I would just give it a STEM twist. I will be sharing some lessons with you, but just know that when I am planning lessons, I am always planning with standards. It's ingrained in my soul.

Make sure you check out your science standards. When it comes to the top tools, this is hard to pick my favorite, but I do have a few favorites when it comes to the science part of things. One of my favorite tools, and I always used these, and some of these might sound very random, but they are things that I liked having on hand.

I have a little set of 3D toys or models of the life cycle of a ladybug. That is something that would come up all the time. I used it as an example or a model for something to show kids when talking about insects or life cycles. Having that model was something I pulled out all the time. Likewise, having similar hands-on models is one of my favorite things to show. I even taught an in-person STEM class the other day at my local coffee shop, and I was so excited it was sold out.

We were talking about camouflage and how ocean animals, specifically octopuses, but then we started talking about other ocean animals. The kids were very engaged, so I brought in real coral and real seashells that I had found while traveling. I love having those tangible hands-on things where kids can see, touch, and look at them to make sense of what they’re learning. I’ve even had times when people have given me things, and you can't keep everything, of course, but I had a parent ask me if I wanted to hold on to a wasp nest for a while. All the wasps were gone, and that was such a cool experience for the kids to see it. Some of them were scared, but I assured them the wasps were gone.

I even did a segment on our school-wide video news where I interviewed the kid who brought it in. We put it on the news, and I answered all the questions I kept getting about it. Having those hands-on models are very, very important, and they can be used over and over again.

Along with that, with top tools, this kind of flows into everything as well. I love to travel. I don't know if you guys know that. Maybe you've seen it on my Instagram. If you follow me on Instagram at NaomiMeredith_underscore, you'll see I love to travel. When I travel, I'm always thinking about STEM. I can't get away from it. I take videos and pictures of things that I know my students would love, and I use these photos and pictures as talking points when I am chatting with kids. It’s a great way to get to know them, but I will show them, “Oh my gosh, I saw this while whale watching,” and explain how animals didn’t want to be camouflaged, they wanted to be showy. I show videos from that experience. When you’re traveling, or if you’re going to the zoo, take some extra photos or pictures that you know will connect to a lesson, and you can pull them out later. These might not be the types of science tools you thought of, but those are things I really love to use to enhance my lessons.

Okay, so on to those lesson ideas. Yes, STEM is all integrated, but we’re really thinking about how science is the main standard for this subject. For this series, when we talk about each letter of STEM, or the upcoming episodes, I will be sharing with you a project, a station, and a one-day lesson. Depending on how long you see kids or what you are looking for, this will give you some good ideas.

In terms of a project, the standards that I was looking at were in second grade and the NGSS. It was about how weathering and erosion can happen, and I focused on water erosion for this project. The project goes through the whole engineering design process. Students explore different ways and inventions that help with water erosion. It can be tricky, especially for third grade and younger, to find resources that help with the imagining and planning phases. I wrote short, kid-friendly articles with image examples and audio where kids can explore different inventions. From there, students plan their design using those ideas, combining what they have learned. They create an invention using maker space materials to try to either stop or slow down water erosion of the soil.

When I've done this with second grade, I've tried it a few ways. There are certain supplies they could use, or I've done a shopping method where students shop for supplies. If you're interested, go back and listen to episodes five and six about maker space, as I discuss the shopping piece. When we got to testing their designs, I tried different methods. One year, I had buckets of dirt and soil, probably potting soil, and students tested their designs in these buckets. It was December, so it was cold in Colorado. But when I did this lesson again in October, it was warmer, so we tested our designs outside. Testing inside was nice because the buckets of dirt could dry out and be ready for the next few weeks. But taking kids outside wasTesting inside was nice because the buckets of dirt could dry out and be ready for the next few weeks. But taking kids outside was fun too, as they had to adjust their designs and see how they worked with water. If you want to test this lesson indoors, I highly recommend using those buckets of dirt.

For a station lesson, this can be something used in rotations, especially if you have lower grades. I have a lot of robot extensions and use robots to integrate science concepts, specifically animal adaptations and how that translates into robots. You could start by reading “What if You Had Animal Eyes?” or “What if You Had Animal Hair?” which are very cute books and only take 10-15 minutes to read. Then, you could discuss how engineers get ideas from nature, called biomimicry. Following this, you could have different science stations with robotics extensions. One example is using Cubelets to have kids build different robots representing animal features, like eyes that can see or camouflage.

Another station example is using Bee-Bots to talk about habitats. You could have maps with different animal habitats, and students can program the Bee-Bot to go to different locations on the map. If you have older students, they could create the maps for the younger kids to use. There are many ways to connect robots with science concepts, and these are just a few examples.

Finally, for a one-day lesson, I love using littleBits to create inventions. One lesson idea is having students create a warning system for when their drink is too hot. They could use littleBits temperature sensors to create an invention that warns them when the drink is at a certain temperature. This can be tied to discussions about heat and temperature, making it a quick, engaging, and educational activity.

There you go! That was a lot of information, but I hope you found some new ideas and ways to integrate science into your STEM lessons. Remember, integrating science doesn't have to be complicated, and using standards as your foundation will ensure that your lessons are purposeful and impactful.

 

 

Related Episodes/Blog Posts:

Connect with Naomi Meredith:

 

More About your host, Naomi Meredith

Naomi Meredith is an online K-5 STEM Coach in Colorado supporting elementary teachers world-wide navigate the best practices, strategies and tools out there. With over a decade of experience teaching, 5 years teaching elementary STEM, along with a M.Ed. in STEM Leadership and STEM Certificate, Naomi helps teachers world-wide to navigate best practices, strategies and tools out there. 

She offers a variety of tools to help teachers feel successful teaching STEM to their elementary students through lesson plans, online courses, coaching and speaking events.

She truly believes that any teacher out there can learn how to use STEM, innovation and hands-on learning in their classrooms effectively. She can’t wait to connect with you and be your guide!

More About The Elementary STEM Coach Podcast

Are you tired of scrolling online for your next great STEM lesson? Do you feel like there is no time to plan, research and test meaningful STEM lessons, so you throw together a hands-on activity and hope that it works? What systems and routines should you set in place to help students be creative, critically think, and collaborate? 

The Elementary STEM Coach is a podcast for K-5 STEM teachers, classroom teachers, GT specialists, and homeschool parents looking for actionable STEM solutions. Each week, Naomi Meredith will share tools, resources and lesson ideas that are actionable in your classroom and create highly engaging experiences with your students. You’ll learn systems and routines that will create control in the chaos and that will keep you organized all year long. 

Your mindless scrolling days are over! Your new STEM-best friend is now here in your ear buds!

how to teach a STEM lesson

How to Teach a STEM Lesson [ep.35]

How to Teach a STEM Lesson [ep.35]

how to teach a STEM lesson

Check out the full episode on How to Teach a STEM LEsson:  

 

 

Subscribe to the podcast HERE on your favorite podcasting platform.

Have a STEM question? Leave a voice message for the podcast!

Watch the video version on YouTube here:

Episode Summary

Struggling to find a structure and a flow when teaching your STEM lessons?

In today's episode, I'll be sharing with you how to teach all of my K through five STEM lessons.

This method has allowed me to get through the content. Students are able to have enough work time, and it even saves a little room for cleanup at the end.

 

In this episode, you’ll learn:

  • How to teach a STEM lesson using the workshop model
  • What the workshop model is
  • Each stage of the workshop model

Resources Mentioned:

Episode Transcript: 

Naomi Meredith  00:00

Struggling to find a structure and a flow when teaching your STEM lessons? In today's episode, I'll be sharing with you the exact format that I use to teach all of my K through five STEM lessons. 


Naomi Meredith  00:11

This method has been a game changer for me during the past five years as a STEM teacher, and it has allowed me to get through the content. Students are able to have enough work time, and it even saves a little room for cleanup at the end. Let's jump right in. 


Naomi Meredith  00:59

I originally taught in the classroom for six years before I landed my role in K through five STEM. I was in a brand new district with a brand new remodeled classroom, limited tools and zero curriculum. It was super overwhelming at first. But I knew that my time spent as a classroom teacher for six years before this role was definitely an asset. I even talked about this in episode 11 of the podcast, why classroom teachers make great STEM teachers. So go back and take a listen if this is a role that you have tumbled into, and you just don't know where to begin. Overall, this is why I created this podcast. This is something that I wish I had, so I am giving back to you. We know that time goes by super fast as a teacher, especially as a specialist teacher. I'm going to be sharing with you the exact model that I use to teach all of my lessons in my classroom. This is a structure that I didn't invent. You might be a little bit surprised by what I'm going to be sharing with you, and I'm ready to spill all the secrets. Do you want to hear what the model I use is? It's the workshop model, not new, but I use this structure in my K through five STEM space for all of my lessons. I'm going to break down for you exactly how I use the workshop model. 


Naomi Meredith  02:22

In my classroom, I use the workshop model when integrating the Engineering Design Process with my projects and with STEM stations. I know that you can too. It will definitely give you the structure that you are looking for, and you don't have to change it up every day. If you keep it the same every single day, students will know what to expect when they come into your classroom, and it will ease the stress of your teaching. It will definitely help you with time management with all of the things going on. Real quick, here's an overview of the workshop model. If you haven't used this method of teaching, think of the workshop model as a circle of a pie chart. So literally, your time is in a circle, you are going to break it up into a few different sections. I have my classes for 45 minutes, K through five. So depending on the time that you have with kids, you will adjust accordingly. I'm also not including the transition time that I have in between classes because that is separate from this workshop model. So keep that in mind as well. Within the workshop model, you have it broken up into three parts, but not three equal parts. You have a medium slice, a big slice of the pie, which is most of it and a tiny slice at the end. First, our medium slice is the mini lesson. For me my mini lessons are between five to eight minutes. After that you have the practice time. This is when students are collaborating, they're working independently, or maybe they're in station rotations. For me, my practice time is between 25 to 35 minutes. Finally, the tiniest slice of the pie that is between two to five minutes is your share, reflect and clean up. I structure all of my classes this way, and it just brings a ton of consistency. 


Naomi Meredith  04:12

But let's really talk about what each of those timeframes look like, depending on the lesson that I'm teaching. Throughout the year, my second grade students come into my classroom often with their classroom computers. I don't have a classroom set of computers in my room. So I have set this up from day one, that for 90% of the lessons that I'm going to teach students will carry their classroom computer with them to my classroom, we may or may not use it, but it's just great that they have it. I also like to connect the lessons to what they're doing within their class, even just by the simple fact of logging into their student computer. This gives them that extra practice. Yes, it might take longer sometimes, especially with the younger students, but I just want to set up the expectation that we will sometimes use tech now as a tool, not as a toy to help us with the lessons that we're teaching. When students come in with their computer, their role is computer on the table, sit on the floor. When they sit on the floor, they are in my group meeting area and they're ready to go for the lesson. If they don't have their computer or if they're younger students, they're only one step direction is sit on the floor. One hundred percent of the time, I've talked about this in past episodes, I don't have students sitting at the tables when I teach. My room is ginormous, and I don't talk very loud. I know the kids aren't listening to me when they are spread out along the room. Yes, K through five, my big kids do this as well. I don't feel bad because in PE and music, they don't have chairs either. They have to sit on the floor. So don't feel bad at all. They are okay. They're sitting on the floor in front of our group meeting area. That's where I have my TV and all the materials ready to go to teach the lesson. 


Naomi Meredith  05:55

Another great way to maximize your time is on the screen, have a warm up question related to the project that you're going to be working on. Or even have the slides that you will be teaching from ready to go have student examples, something related to the lesson that will pique their interest and get their mindset ready to go. I am very big on using every moment wisely. So even just the act of having something on the screen for students to look at and talk about with the people next to them is extremely valuable when I am teaching with the Engineering Design Process. All of my Engineering Design Process notebooks are digital. I actually don't create separate slides to teach from. I teach from the student slides that I assigned to them. I will typically assign them in Seesaw, sometimes in Google Classroom, but I will be physically logged in as a teacher opening up the slides within that class I am teaching from so they can see me interact with the slides just as if they were as well. It's great to connect the two together and the kids know they have access to everything that I am showing them. So nothing I am showing them is a surprise. If you are curious to hear more about the Engineering Design Process. I talked about this and a lot of my episodes, but more specifically in Episodes 15 and 17 through 21. So go back and take a listen. I break down each stage of the Engineering Design Process and how you can use this within your space. 


Naomi Meredith  07:28

When I am teaching the mini lesson, it is very short. It is a mini lesson and I am able to include everything I need to within the short amount of time. If you forget anything, you can pause the class during their practice and work time and remind them of the next steps. There is nothing wrong with that. The goal of this is when students are sitting down ready to learn, they are getting the bulk of the information from you. You are the teacher, you can keep teaching throughout the class time. When I'm teaching with the Engineering Design Process, the mini lesson is when I am introducing each step very specifically. Day one is when I would do the ask, imagine, and have students to start planning their designs. Day two is when students will be finishing up their designs and begin to create what they are hoping to design. Day three and four is all about more creation, experimenting, and improving. I might even introduce a modification checklist so the can see how to make their design better. All of my mini lessons are going to be really focused in on each of these stages. The final day is more experimenting, improving, and how students are going to share their work. 


Naomi Meredith  08:41

When I was a classroom teacher, I always taught with a workshop model anyway, and I am always teaching the next step. Some kids might not be ready for my lesson, but they know where they're going. They can look back in their digital Engineering Design Process notebook from the week and see what they missed and what they need to keep working on to get to where I am teaching for the day. Again, I'm always teaching the next step and I tell my students that it's okay if they're not there yet. I'm teaching them where they are headed so they can be successful and know what to work on. This is also a time where I will build a background and the science behind what we are doing. This can be day one, but I will also do this during the week as well because students can always modify and change their design. So there's nothing wrong with doing background information a little bit each day. This might be a related video that I found, a website, or an article. Again, these are all linked in their Engineering Design Process notebooks. I often have to show the class the videos at the same time because they are linked to YouTube and my district blocks YouTube. So that's the only way that we can watch them. The kids know that they even want to watch it at home. They have access to these links as well for more specific lessons during this mini lesson. 


Naomi Meredith  09:53

If I'm doing a Makerspace project, this is where I would talk about the Makerspace menu and money system. If I am doing a technology project, this is also when I would talk about very specific things on how to get connected to the technology. For example, if I am teaching robotics with a Sphero, or a Dash robot, this is where I will physically show them how to connect to that robot. I also have visual directions that I will post after my mini lesson. I will refer to them when I am teaching. So I will model how to get to that specific technology. But then that digital anchor chart will also be posted with visuals to remind students how to do the steps that I just talked about. I highly recommend making these anchor charts digital and not cluttering your walls with all of them. Unless you're using the same tool K through five, I don't have a whole lot of wall space. I'm very specific about the things that I hang up. I want everything to be purposeful in my classroom for all classes. That's why I will make a lot of these anchor charts digital, of course, they're linked to my TPT shop. But that way, I can pull up what I need. It's very specific for that class, and I don't have to print a million things. I don't have the time for that either.


Naomi Meredith  11:07

If I'm doing a station rotation, the mini lesson is also the time where I will build the background knowledge and have a related video about the topic. I will also show students how to complete each of the stations. I will do the same process for both days of stations. I do for station rotations, when I do stations with my younger students, I will have a station for each letter of STEM. They will complete two stations a day. Same process. I don't assume that they remember how to do the stations. Some will and some won't. Some kids are absent, some kids were new for the day. So I always will review those expectations for my classes who have a hard time with behavior. I will also, during this mini lesson, go over the specific ways of how they can earn their class incentive and refer to each of those expectations as well. This mini lesson is when I am the star of the show. Going over those very specific things I need them to do during their work time. I am not up there for very long. So I really have to get the most bang for my buck during this time. Because the majority of class time they are going to be working on their projects, whatever it is that we are doing for the week. I do realize that it can be tricky when you are using technology as one of your main sources of tools. Then you want to show them how to use the technology. Then you want to show them how it's going to connect to everything. When this happens, this is usually for me when we are doing a coding platform and Engineering Design Process notebook. 


Naomi Meredith  14:14

If that is digital or even logging into 3D printing, I will break up the mini lesson and the practice time that's student work time. Often I will get their excitement, build a little bit of background, then I will show students how to connect to the tool or how to log in how to get that all set up. So I tell them we're getting our materials ready first, and then I'm going to show you how to use that. I will show them those steps have the visual directions backup for them. They will go get their materials ready, leave them ready to go and then come back to the floor for students who need a lot more support. There's only one of you and a lot of them. I will show them all the steps and let's say it's a Engineering Design Process notebook I want them to get to, I will have the visual steps on one side and then the page I want them in their engineering notebook ready to go. I will tell them when everybody at your table has their screen matching mine, you will come to the floor, nothing in your hands. So that means that all the kids have to help each other at their table. They can't do it for them, they have to be the YouTube tutorial and show them how to do it by pointing. Then when everybody is ready to go, then they can come to the floor. This has really helped where students are being more independent and helpful when it comes to technology, and not always relying on me for every single troubleshooting issue. This also frees me up for the students who really are having problems that none of the kids can solve. I'm not running around fixing everything. There are usually at least a couple of kids at each table who can be successful and who are happy to help. 


Naomi Meredith  15:47

From there, I will finish off the mini lesson where the kids are on the floor, the materials are ready to go. I'll show them how to use it, how it relates to the lesson. Then we will move on to that practice time because everything is set up and ready to go. So this is a great way to break it up where the kids aren't sitting for 20 minutes. You're kind of merging that mini lesson and that work time together. Now we are officially moving on to that practice time when it comes to the workshop model. And of course, I have all the helpful tools posted up on my screen ready for kids to access. My favorite that I have mentioned before is classroomscreen.com, where you can upload images. There's timer widgets, there's a text box where you can type things, you can have everything displayed all nicely in one place. You don't have to minimize your tabs and make them fit perfectly. Everything is all there for you and I highly recommend checking that out if you haven't used classroomscreen.com already. I will almost always have a timer up on my screen during the student work time. So students are aware of how much time they have to work in my class. During station rotations, I actually don't only because I do stations with Kindergarten and first grade. I kind of have to gauge what is going on in the classroom. I will typically set a timer on my watch, and I will use that as a guide noticing if groups are a little bit squirrely. Or if they need a little bit more time, they sometimes will ask me how much time they have left, I will always tell them. 


Naomi Meredith  17:21

But this actually worked well for station rotations just based on the class and their experience with station rotations and how they're feeling that day with the materials at hand. When students are working, they usually want to work with others when it's on station rotations. I allow them to work in groups of one, two or three. Our projects are usually really small. I'm really big about having small projects because they're easier to store. I tell them if you want to be a group of four, just do two and two, that way, you have more of a chance to work on everything. This has worked really well. I used to do bigger groups in the past, but I realized not all kids had a chance to participate, there wasn't enough for them to do. So keeping groups smaller really helps with the collaboration they had can have a voice during their work time and feel like that they are involved in the project. During this time, I will be roaming the room assisting as needed. I'm really big about ask three before me, especially when it comes to troubleshooting or what questions they have. Again, I am the guide on the side, I am not the star of the show during this work time. I am during the mini lesson, trust me, you should see me in action. But during this work time, it's all about them getting all the work done that they have at hand. 


Naomi Meredith  18:36

Finally, the last part of the workshop model that is the smallest and that is the share, reflect and I added in that clean up. For me this is about two to five minutes, it is quick, and I am able to get my classes to clean up very fast here and there. I will have a class who are very, very slow cleaning up, they might need more time. I keep that in mind and balance it all out. But for the most part, most classes can clean up in about five minutes. When it comes to station rotations, they will clean up before they rotate. So again, I'll have that mini lesson we have the video building background, I show them how to do the stations, they will work in their stations, then they will clean up and stand at their clean station. They're not allowed to go anywhere. They don't know where they're going. They have to be cleaned up before they're able to rotate. After all the stations are cleaned up, I will have them stand there I will go to that station, I will stay in there with them and show them how to point to their next station. When everybody's pointing to their next station, they will walk to the next one and work on what they have at hand. 


Naomi Meredith  19:39

Again, when the time is up, they will clean up they'll stand up their clean station and then they'll come and join me on the floor and we will learn and then we will reflect on the learning for the day. For an Engineering Design Process project we will clean up and then they will either sit at their tables or they'll all join me on the floor depending on where we're at with that cleanup. I like to use the same reflection questions that are in their  Engineering Design Process notebooks at the very end, what went well? What was the challenge for them? If they were to do this project again, what would they work on? I might even ask them what went well, what would you recommend? So for kids who are going to be on that next stage tomorrow, what advice would they give them. So questions like this are really helpful to talk about as a class, and to really close up everything that happened for the day, you can also make a digital check in a lot like what Jill mentioned in her guest interview and a past episode, but you could do a digital check in as to where they're at in the Engineering Design Process, or how they are feeling and that part of the process. You could create this in a Google slide or a Google jam board, and there is a little circle that has the kids classroom number, and they can move that little circle as to where they are feeling. A lot of different ways to reflect, you don't have to go overboard with this. But it's good to have some sort of closure, where it's not just clean up, run out the door. When we're all done for the day, I will let the class know if they earn their classic incentive, and then they will go line up in my green hallway so they are ready to go for the teacher. Again, I don't have them lineup in my classroom because if the teacher is late or if another class is early, then they are all in the hallway, and they're ready for that teacher. Then I can clean up any last things prepare any last materials before my next class comes for the day. 


Naomi Meredith  21:22

As a recap, here is how to teach a STEM lesson when using the workshop model. First, we talked about what the workshop model is, then you move on to the mini lesson to start it all off. The bulk of your work time is that practice time, then you piece it all together with the share, reflect and clean up time by creating a predictable structure for all of your lessons K through five, not only will this be helpful for you as a teacher, it'll create that consistency for the students. So when they step into your space, they will always know what is going on with the actual content, but the structure is always going to be the same. This is going to help with your classroom management, behavior management, and even help you get through all of the content, no matter how much time you have with kids, and how often that you see them.

how to teach a STEM lesson

how to teach a STEM lesson

Related Episodes/Blog Posts:

Connect with Naomi Meredith:

 

More About your host, Naomi Meredith

Naomi Meredith is a former classroom teacher turned current K-5 STEM teacher and coach. Her role not only includes teaching over 500 students in her school, but also leading professional development and co-teaching with teachers to help them integrate STEM & Technology.

With over a decade of experience along with a M.Ed. in STEM Leadership and STEM certificate, she helps teachers navigate the best practices, strategies and tools out there.

She truly believes that any teacher out there can learn how to use STEM & Technology in their classrooms effectively. She can’t wait to connect with you and be your guide!

More About The Elementary STEM Coach Podcast

Are you tired of scrolling online for your next great STEM lesson? Do you feel like there is no time to plan, research and test meaningful STEM lessons, so you throw together a hands-on activity and hope that it works? What systems and routines should you set in place to help students be creative, critically think, and collaborate? 

The Elementary STEM Coach is a podcast for K-5 STEM teachers, classroom teachers, GT specialists, and homeschool parents looking for actionable STEM solutions. Each week, Naomi Meredith will share tools, resources and lesson ideas that are actionable in your classroom and create highly engaging experiences with your students. You’ll learn systems and routines that will create control in the chaos and that will keep you organized all year long. 

Your mindless scrolling days are over! Your new STEM-best friend is now here in your ear buds!

halloween stem activities

5 Halloween STEM Activities to Try [ep. 27]

5 Halloween STEM Activities to Try [ep. 27]

halloween stem activities

Check out the full episode on 5 Halloween STEM Activities to Try:  

 

Subscribe to the podcast HERE on your favorite podcasting platform.

Have a STEM question? Leave a voice message for the podcast!

Episode Summary

With Halloween right around the corner, you are most likely thinking of Halloween-themed STEM activities to try. 

If you’re looking for ideas fun ideas for STEM activities that are perfect for class parties, one-day challenges, and class rewards, then I have you covered.

In today’s episode, I will share five Halloween STEM activities for you to try.

In this episode, you’ll learn:

  • Monster mouths
  • Jack-o'-lantern robot coding
  • Spider pulleys
  • Slime explorations
  • There was an Old Lady Who Swallowed a Bat STEM stations

Resources Mentioned:

Episode Transcript: 

Naomi Meredith  00:00

Looking for some fun Halloween STEM activities to try. I've got you covered. These are perfect for class parties, one-day challenges, and class rewards. Let's jump into these spooktacular activities. 


Naomi Meredith  00:47

To help me get in the mood for this episode, I wore my Jack-O' Lantern shirt. Let me tell you, I am definitely a STEM teacher elementary teacher at heart. My Teacher Honey and I aren't the same age. He's older than me. I tell him when it's Halloween time, I need to have my millennial moments and get in the mood and dress up, which makes it even more fun because we have our little dog Frederick and Frederick and I do the couple's costumes. My Teacher Honey doesn't do any of that. My first year when I got Frederick, I was an astronaut, and Frederick was my little rocket. I made him a little rocket pack out of water bottles that I painted with silver paint and used tissue paper for the flame. So super cute! I had that picture hung up on my wall for a long time, and the younger students kept asking me if I was a real astronaut, and they totally believed me that I was even though I'm holding my dog in the picture. Depending on what mood I was in, I would tell them, “Yes, I am. And that's why I'm a teacher.” But no, I'm really not a real astronaut, but it was a fun costume. 


Naomi Meredith  01:59

The second Halloween with Frederick, I was Miss Frizzle, and he was my little lizard. Of course, I wore that outfit to school but didn't bring Frederick along. When I brought him to doggy daycare and picked him up that afternoon, he actually won the costume contest, which I didn't even know was a contest. I just wanted to dress up, so that was super fun. This year, I am going to dress as a Starbucks barista, and he is going to be my little puppet chino. So poor little Freddy Fred has to dress up with me, and my Teacher Honey is off the hook. 


Naomi Meredith  02:36

So, of course, I'm very excited about this episode because I have five Halloween STEM activities for you to try. I think that you and your students are really going to love them. They aren't tied to Halloween specifically, so if your school or classroom doesn't celebrate Halloween, you can still do these in your classroom. They have a spooky twist, but they're not necessarily let's celebrate Halloween together. So you can still implement these in your classroom no matter what your school or classroom celebrates. Also, if you're looking for more activities, I have five different STEM challenges that I talked about in episode 23, and they are all about fall. You could do all of these Halloween-themed ones and all of the fall ones and just have a fun STEM-themed classroom experience. 


Naomi Meredith  03:25

The first Halloween STEM activity to try is Monster mouth. A lot of times when I am getting inspiration for my holiday-themed STEM activities, I like to browse the Dollar Tree and the Target dollar section to help me give ideas. Also, it's a good excuse for me to buy some things. So that's pretty fun, too. For this challenge, you will need plastic vampire mouths, googly eyes, and LEGO bricks. You can tie in a monster-themed story. One of my favorites is I need a monster. The book itself is so cute, but there also is an adorable little animation of the story that I will embed in the show notes that you should definitely watch with your class. It's a little spooky at first, but then it's just a happy, cute ending. I've even shown it to my Kindergarten class, and they're a little bit scared, but then they're okay. After reading this story, you can have students create their own monsters. You can have them start building right away, or they can plan their design. The creations are absolutely hilarious because of what they come up with. What makes this quite a challenge is they can't use any tape to tape on the monster's mouth. They have to engineer a way for the teeth to be held by the LEGO bricks. Students have such creative ideas, and it is so fun to take pictures of their creations and send those out to families in Seesaw, Flipgrid, or whatever platform you use. If you only have a small class of kids, you can let them keep those little vampire teeth. Or, like me, when I teach all the students in school, I do have to take them back. I will say I have had some kids walk off with them, and that's pretty disgusting because they have been used a lot of times. But this is a fun monster-themed challenge to try. 


Naomi Meredith  05:21

The second Halloween STEM activity to try is Jack-O'-Lantern robot coding. Back in that fall episode, I talked about the importance of having a grid for students to code the robot to, so make sure to go and listen to that part. But for this one, you will want to have a grid for your specific robots, with dice with different faces of Jack-O'-Lanterns on them and different sizes of pumpkins. Likewise, those same images you can have printed out on cards that are mixed up and spread all along the grid, students will roll one of each dice so one dice with the Jack-O'-Lantern face and one dice with the pumpkin size. In turn, they will code their robot to collect the Jack-O'-Lantern phase that will go on the corresponding pumpkin size. If you want to make this even more hands-on, instead of having cards, you could have felt pumpkins that you could cut out on a Cricut machine or even by hand and different Jack-O'-Lantern faces that you've cut out. Those could be lining the border of your coding mat. When students code to those different sections, they can actually build the physical Jack-O'-Lantern. So there are a lot of variations to this. You can have a lot of fun with it and have a different building experience when it comes to coding. 


Naomi Meredith  06:45

The third Halloween STEM activity to try is spider pulleys. Again, this is another low-prep one, but the kids absolutely love it. After talking about the science of pulleys and different pulleys out there, students can create their own pulley system that will help pull the spider up to their web. For this challenge, all you will need are those cute little spider rings that you know as a kid, you got to put one on every finger and think you're beautiful. I'm not saying that I did that. Wink wink. But you have those spider rings, yarn, and pencils, and you tie a long piece of string on those rings and onto the pencils. I recommend doing this ahead of time, so they're ready to go. This is a big challenge for a lot of kids to make those tiny knots. So just go ahead and tie those before you start the challenge. Then you have tiny spider webs printed out on paper and LEGO bricks, or you can even use Makerspace items. Students will create a system where the pulley can be in their design and be steady, and while they turn the pulley, the spider can go up the web. Again, you could send kids on their way with these rings or keep them for a lot of different classes. 


Naomi Meredith  07:57

The fourth Halloween STEM challenge to try is slime explorations. I know a lot of teachers and parents have different opinions when it comes to slime. I recommend, if you can, and if the weather is nice enough, doing this outside. It's a great way to explore the outdoors with this messy experiment. This is also a great lesson on matter and all three states of matter. You can explore how slime does not always follow the rules of solids, liquids, and gases but is more of a non-newtonian fluid. You could talk about all of that science with students. This is also a great way to try different recipes, and students can compare the different types of slime and what they can and can't do. For example, some of the things you can have students observe are which one was the stickiest, which one was the smoothest, the gooiest, the most bouncy, and the most stretchy. My favorite slime out there uses baking soda, glue, and contact solution. You can just Google it and find the recipe. A way to make this even spookier is you can buy glue that glows in the dark. I know that it glows in black light, but I'm not 100% sure if it glows in just a dark room, so test it out. They make big jugs of it, and it's sparkly and so much fun. Another thing too for the slime is having some gloves on hand for students who have sensory needs. Not all kids like the sensation of slime, so having this available is a great backup for students who still want to experiment with this fun challenge but don't necessarily want their hands in contact with the slime. 


Naomi Meredith  09:43

The fifth Halloween STEM challenge to try is There Was an Old Lady Who Swallowed a Bat. I have four station ideas that you can use in your classroom. This will get two days of planning done for you if you do two stations a day after you read this story or listen to an audio version. Now, most kids think this book is really funny. I had a Kindergarten class one year that had the weirdest reaction. They kept saying, “Eww! This is gross,” or, “Oh, what's wrong with her?” So that Kindergarten class wasn't a huge fan. Most classes just laugh and think it's funny, but this class had a totally different response. So read that story and have the different things that the old lady swallows and pictures of those things. They could be real or clip art versions. 


Naomi Meredith  10:37

Here are the four different stations that you can use that go along with this story. The first one is students can use LEGO bricks or whatever type of blocks that they have. They can build the different items that the old lady eats and then have an old lady face, and they can feed her all of those different items in the order that it happens in the story. This is really good for the beginning, middle, and end, paying attention to details and having the sequential steps of a story. So you're tying in those ELA standards. At the second station, you can add in some robotic coding. You have the different pictures of those things that the old lady ate, and students can code to those different items in the story and in the order that they happened. The third station that you can have is students can create pixel images of those things that the old lady ate. My favorite way for kids to create pixel art is using the boards that are from the Bloxels kits. I will link this in the show notes for you. Bloxels actually has a paid subscription where students can use the images that they create on the board and then put them into a game that they can create. I actually don't buy the subscription. I just really liked the boards, and the kids love the little pieces. It's great for fine motor skills and seeing the big picture, and breaking it apart into sections. The Fourth Station that you can have that will go along with the story is that students can build the different items that the old lady ate using digital blocks in Seesaw or ones that you can create in Google Slides. You can even have students graph the number of different blocks that they use. For example, if they create a bat using specific pattern blocks, they can graph how many of each type of block they used in their design, so you are adding in that math piece. 


Naomi Meredith  12:27

As a recap, here are the five Halloween STEM activities that you can try in your classroom. First are monster mouths. Second, Jack-O'-Lantern robot coding. Third, spider pulleys. Fourth, slime explorations. Fifth, There was an Old Lady Who Swallowed a Bat STEM stations. Also, I would love to invite you over to my Ultimate STEM Resource Library where these challenges and even more October-themed STEM challenges are there for the rest of this month and other fun bonuses as well. You definitely want to jump in on this membership because there are some awesome changes coming up for 2023 that I definitely don't want you to miss out on. Thank you so much for being here, and have a happy Halloween.

 


halloween stem activities

halloween stem activities

halloween stem activities

halloween stem activities

halloween stem activities

halloween stem activities

halloween stem activities

halloween stem activities

 

Related Episodes/Blog Posts:

 

Connect with Naomi Meredith:

 

More About your host, Naomi Meredith

Naomi Meredith is a former classroom teacher turned current K-5 STEM teacher and coach. Her role not only includes teaching over 500 students in her school, but also leading professional development and co-teaching with teachers to help them integrate STEM & Technology.

With over a decade of experience along with a M.Ed. in STEM Leadership and STEM certificate, she helps teachers navigate the best practices, strategies and tools out there.

She truly believes that any teacher out there can learn how to use STEM & Technology in their classrooms effectively. She can’t wait to connect with you and be your guide!

More About The Elementary STEM Coach Podcast

Are you tired of scrolling online for your next great STEM lesson? Do you feel like there is no time to plan, research and test meaningful STEM lessons, so you throw together a hands-on activity and hope that it works? What systems and routines should you set in place to help students be creative, critically think, and collaborate? 

The Elementary STEM Coach is a podcast for K-5 STEM teachers, classroom teachers, GT specialists, and homeschool parents looking for actionable STEM solutions. Each week, Naomi Meredith will share tools, resources and lesson ideas that are actionable in your classroom and create highly engaging experiences with your students. You’ll learn systems and routines that will create control in the chaos and that will keep you organized all year long. 

Your mindless scrolling days are over! Your new STEM-best friend is now here in your ear buds!

structure-a-stem-lesson

How Do You Structure a STEM Lesson? [ep. 25]

How Do You Structure a STEM Lesson? [ep. 25]

structure-a-stem-lesson

Check out the full episode on How Do You Structure a STEM Lesson?:  

Subscribe to the podcast HERE on your favorite podcasting platform.

Have a STEM question? Leave a voice message for the podcast!

Episode Summary

With all the cool tools and resources out there, it's important to structure your STEM lesson so that it is rooted in standards but still engaging. 

In this episode, I will be sharing with you four different ways that you can plan and structure a STEM lesson and make it work for the time that you have in your classroom.

In this episode, you’ll learn four different ways that you can structure planning your STEM lessons:

  • Multi-day projects
  • Challenges of the day
  • STEM and stories
  • STEM stations

Resources Mentioned:

Episode Transcript: 

Naomi Meredith  00:00

With all the cool tools and resources out there, it's important to structure your STEM lesson that is rooted in standards but still engaging. In this episode, I will be sharing with you four different ways that you can plan a STEM lesson and make it work for the time that you have in your classroom. 


Naomi Meredith  00:49

In the last episode, Episode 24, we talked about how to organize all of those ideas and lead up to the actual lesson planning for your STEM lessons. So make sure to go back and check that out because we are at the tail end of that episode and are now getting into how to dive into that planning. Also, if you're curious about how actually to plan your whole STEM scope and sequence, I also recommend checking out episode 14, where I go more into detail about that process. So how do you structure a STEM lesson? Here are four ways that you can structure your STEM lesson, and I know that you are going to find a way that works best for you. You may even try all four of these ideas. 


Naomi Meredith  01:37

First are multi-day projects. For this and all of the different ways to plan, I am going to be talking about how I use the Engineering Design Process as my base, especially when it comes to those multi-day projects. I am really zoning in on the Engineering Design Process. If that's a process that you're not using, this is when you can implement project-based learning, design thinking, the launch process, or even the scientific method, whatever method you are using for planning. This is when I think about those longer multi-day projects. When I'm thinking about multi-day projects, I'm thinking projects that will obviously last more than one day, about three to five days, and you have 40 minutes plus with your classes. I will definitely stretch out and use all of my days with my second and fifth graders and really dive into all of those stages of the Engineering Design Process. 


Naomi Meredith  02:37

For my first and Kindergarten students, I typically have their multi-day projects last about three days. Then I use the remaining two days of my week doing STEM stations, which is another way of planning. We're going to talk about this later in the episode. When working on multi-day projects, here is how I break up all of the stages of the Engineering Design Process. Day one is all about ask and imagine, so using all of those resources to build background and really dive into that S-the science part of the project. Day two is finishing up any imagining and zoning in on their plans, and being thoughtful with those plans. Then days three through five are all about creation, experimenting, and improving, which those stages go back and forth a lot. Then eventually sharing their work in a way that makes sense for that project. 


Naomi Meredith  03:31

I do see kids K through five, five days in a row, the same six classes throughout that same week. If you're a teacher who sees different classes every day, here's how I might split up your multi-day projects. Day one would be all about your asking, imagine. On day two, you could finish up the imagining stage, dive into the plan, and start to gather materials. Maybe you don't have them build quite yet because you probably don't have anywhere to store projects that are being built. Then the final week that they come, day three, or if you do want to carry it into day four, the kids are diving into the creation, experimenting, improving, and sharing piece. Again, remember to have smaller projects. This will also help kids get their buildings done a lot faster. If you are storing projects for more than one day, if the projects are smaller then you will have more ways to creatively store those projects. I know storage can be really tricky, especially when we're not always going into classrooms that were originally designed to be a STEM space. 


Naomi Meredith  04:39

Now multi-day projects might not work best for everybody, and that's okay. Sometimes your schedule is out of your control. So this is for my people who do see the kids one day a week, or if you need ideas for sub plans, if you have a weird week, if you do see kids once a week, one day, but then you see them again the rest of the week. So, for example, there was one year that I taught, and my schedule was a bit funky. On Mondays, I taught eight classes a day, I did say eight, for 35 to 40 minutes. I can't remember exactly. But I taught eight classes in a day, it was insane. Let me tell you, I was super sweaty at the end of the day, that was on Mondays. Tuesday, I was co-teaching with the classroom teachers to help them implement STEM and technology in their instruction. Then Wednesday through Friday, I had the same classes, my same six classes K through five, for three days in a row. 


Naomi Meredith  05:40

For my multi-day projects, I had to zone in, make them more simple, and even shorten some stages of the Engineering Design Process. I also, on those Mondays, didn't connect it with my Wednesday through Friday schedule because it wasn't always the same kids that lined up for that week. So I use this method of the challenge of the day on my Mondays, where it was a quick STEM lesson that had elements of the Engineering Design Process and still planned with standards. I would start and finish within that Monday. So that's all the time that we got. 


Naomi Meredith  06:17

So this brings me to my second way to structure your STEM lessons, and that is the challenge of the day. Like the name says, you are done with a challenge in one day. It has elements of the Engineering Design Process, so you can go through them very quickly or zone in on one or two of them. You are literally done in one day. Here are some examples of challenges of the day that I have done in those random one-day lessons. The year that I had that one day is when I did all of those Dot Day activities. They were quick, they were fun, and students were able to express their creativity, but they were complete in one day, which was perfect for Dot Day. If you're interested in hearing about the types of activities that I did for Dot Day, make sure to go back and listen to episode 16, where I give you five different STEM lessons that you can try in your classroom. Another great use of these one-day activities is to do those themed holiday lessons. At the time of this recording, I am in the middle of the fall, and I have five fall STEM activities that you could try in your classroom back in episode 23. Another great use of your challenge of the day is thinking about those quick STEM projects that are rooted in standards that students can explore and zone in on those science topics. 


Naomi Meredith  07:42

I do take home STEM kits called STEM snack packs. These are quick challenges that families can do together and explore, or it could be a great option for the challenge of the day. If you really don't want to plan using the STEM snack pack models, then this could also be a great sub-plan. One of my lessons for this is the foil boat challenge. Students are given one large piece of foil, and they have to design a boat with just the foil. Then they test different objects to see how much they will weigh. So they make a hypothesis of how many of that same object they think their boat will hold, and then they try lots of different things within that boat. They can even calculate the weight of the items that it held. Things that you could put in your boat would be small marbles, LEGO bricks, popsicle sticks, or any tiny things that you might have laying around. You could find the weight of those things and help them do the calculations. So again, quick one-day activities where it really is a challenge of the day. 


Naomi Meredith  08:46

The third way that you can structure your STEM lessons, it's very similar to the challenge of the day, but that is STEM and stories. This one is definitely a favorite for when I have sub plans. If you're a library specialist who is implementing STEM, this is definitely for you. Of course, read the story to your students, and if you are short on time, I recommend you pre-record yourself reading the story. You could get an ebook version of the book and screen-record yourself reading it. It's even more fun if you're reading it at home with your pets or your children. I have my little dog Frederick when I do this, and the kids love it because I talk to him throughout the story.  The kids feel like they're at home with me, and they have that connection piece as well. If I am personally the one pre-reading the story, the students are just as engaged as they would be if I was reading it in person. 


Naomi Meredith  09:44

STEM and stories challenges allow me to gather any supplies that are needed. Also, when I have students who are coming in that have a hard time with transitions, they come in later in my lesson so that way I can chat with them and handle any of those situations. Once the story is over, all the kids are ready to go. I definitely recommend doing this. This is a great time-saving hack. STEM and stories lessons can last for one day, or you can also stretch it out to multiple days. One of my favorites is after reading the story, Not a Box, students will create a straw marble maze. I use Amazon cardboard as their base, and I have it pre-cut. The students use tape and straws to create the maze for their marble to travel through. You can experiment with different marbles, such as round marbles or marbles with a flat side, to see how it changes the pace of their game. 


Naomi Meredith  10:44

After listening to the story, on day one, students can create their straw cardboard maze. On the second day, they can do all of the math and peer reviews that go along with it. They can calculate how fast the marble goes through their maze. They can add points to their game, write the rules, and then have other people play their game and receive feedback on how the game went. This allows them to make modifications along the way. Just like any of these, you can always extend them further and add even more elements of STEM. STEM and stories are a great way to highlight those common core standards that go along with reading literature. Or you could even do a nonfiction text and really highlight their informational standards as well. 


Naomi Meredith  11:28

The fourth way that you can structure your STEM lesson planning is using STEM stations. During my first few years teaching STEM, I did STEM stations with K through five. This was a way for me to test out all the random supplies in my classroom, see what would work for different types of grade levels, and see my kids' skills and capabilities when it came to using different types of tools. Now while being in my fifth year teaching STEM, I have a pretty good grasp of what the capabilities are for all different grade levels. I only use some stations with K through one. Again, this isn't just a primary thing. I highly recommend using stations when you're short on time, so you can also test out all of those interesting tools. For most weeks, when I'm teaching Kindergarten and first grade, I will do a longer project that is three days or a smaller challenge of the day project around the same theme. The last two days are STEM stations. The way that I like to structure STEM stations, and that has worked best for time, is I have four stations, and students rotate through to a day. 


Naomi Meredith  12:41

So here's how I explain it to the kids, “Hold up two fingers on one hand, put up two fingers on the other hand. What is two plus two?” They usually can tell me four, and I'm all, “Great. We're going to do two today and two tomorrow. If you don't get to your favorites today, when are you going to do them?” They say tomorrow. So they understand that they will get through all the stations as long as they're at school and everybody's happy. I can get through explaining the lessons, often showing a short video that correlates with the science standard. They're able to do the first station, clean up, stand at their clean station, point to the next station they're going to, complete that station, clean up, and they are ready to go all in 45 minutes. Also, I don't throw out random things for the kids to do. I still plan everything with themes and with standards. Again, this does take careful planning, and you can pull out bits and pieces of the Engineering Design Process. 


Naomi Meredith  13:44

Now I told you I like to plan with four stations. So naturally, I plan each station that goes along with each letter of STEM, science, technology, engineering, and math. This also helps make sure that I am planning stations that have a variety of tasks for students to do, they are getting a well-balanced experience and their STEM station rotations. For example, here are the four stations that I used when I taught the sun, moon, and stars to first grade. We first started off with a related video with Sideshow kids. Then the science station was moon phase puzzles, where they had all of the different moon phases cut up, and then they put those puzzles back together and got to learn and recognize the details within each of those phases. The technology station was day and night coding where students used to Bee Bots or Blue Bots. They rolled a dice, and there were pictures on the grid that went to each of those things that can be seen during the day, night, or both. 


Naomi Meredith  14:44

The engineering station was some space inspiration. So students had LEGO bricks to build various things that go along with space and all those different images that were provided to them. If I want to mix it up with that space engineering board, I do have some flash cards I got from the Target dollar spot forever ago. They show real-life pictures of things that can be found in space and interesting facts on the back. I had both options for students, and they could choose what worked best for them. The math station was geoboard constellations, and students had different images of famous constellations that they could build using the geoboards and then check off on their laminated list of which constellations they were able to build during that time. Stations can have a little bit more prep work when it comes to supplies. But if you are teaching a lot of classes, it's definitely worth the time. Then you have the tools ready to go for many years to come, and the kids are even more engaged because they all go together and are planned around their standards and go along with that theme. 


Naomi Meredith  15:51

As a recap, here are the four different ways that you can structure planning your STEM lessons. First are multi-day projects. Next are the challenges of the day. Third are STEM and stories lessons, and the fourth is STEM stations. This episode is about finding a planning structure that will work best for you and really root your lessons in standards and research so that the experiences are super meaningful and you are digging into those experiences in your own STEM way. If you want lesson planning templates for this and really dive into structures and routines when it comes to planning and setting up your STEM space, I welcome you to join my course, STEM teacher 101, where I dive in deeper on all of these topics, give you templates and resources, a bonus community to chat with and you even get five PD credit hours that you can take in your own time and be the STEM superstar that you are.

structure-a-stem-lesson

structure-a-stem-lesson

 

Related Episodes/Blog Posts:

 

Connect with Naomi Meredith:

 

More About your host, Naomi Meredith

Naomi Meredith is a former classroom teacher turned current K-5 STEM teacher and coach. Her role not only includes teaching over 500 students in her school, but also leading professional development and co-teaching with teachers to help them integrate STEM & Technology.

With over a decade of experience along with a M.Ed. in STEM Leadership and STEM certificate, she helps teachers navigate the best practices, strategies and tools out there.

She truly believes that any teacher out there can learn how to use STEM & Technology in their classrooms effectively. She can’t wait to connect with you and be your guide!

More About The Elementary STEM Coach Podcast

Are you tired of scrolling online for your next great STEM lesson? Do you feel like there is no time to plan, research and test meaningful STEM lessons, so you throw together a hands-on activity and hope that it works? What systems and routines should you set in place to help students be creative, critically think, and collaborate? 

The Elementary STEM Coach is a podcast for K-5 STEM teachers, classroom teachers, GT specialists, and homeschool parents looking for actionable STEM solutions. Each week, Naomi Meredith will share tools, resources and lesson ideas that are actionable in your classroom and create highly engaging experiences with your students. You’ll learn systems and routines that will create control in the chaos and that will keep you organized all year long. 

Your mindless scrolling days are over! Your new STEM-best friend is now here in your ear buds!

back-to-school-stem-challenges

5 Back to School STEM Challenges to Try [ep. 7]

5 Back to School STEM Challenges to Try [ep.7]

back-to-school-stem-challenges

Check out the full episode on 5 Back to School STEM Challenges to Try:  

 

Watch the video version of the episode here on YouTube:

Episode Summary

No matter how long you have been teaching, preparing for back to school is a lot of work. From setting up your classroom and figuring out systems and routines to attending back to school meetings and lesson planning for the first few weeks, it can feel overwhelming even for the seasoned teacher. 

With so much on your plate, what types of activities should you plan that will be meaningful to your students?

In today's episode, I will share five STEM activities you can use in your K through Five STEM classrooms. These activities are great back to school STEM challenges. Many of these activities I will be sharing with you have an element of collaboration to help build classroom community, which is important in any classroom setting.

Whether you are a STEM teacher or a classroom teacher, this episode will provide you with a variety of activities to implement in your classroom!

In this episode, you’ll learn:

  • 5 back to school STEM challenges
    • Classroom Rules Puzzle
    • All About Me Brick Build
    • STEM & Stories: Rosie Revere, Engineer
    • STEM & Stories: There Was an Old Lady Who Swallowed Some Books
    • Apps About Me
  • How to implement the 5 STEM challenges
  • Materials needed for each STEM challenge

Resources Mentioned:

Some items are linked to my Amazon Affiliate account. When you purchase through my link, there is no added cost to you, but I receive a small commission in return.

Episode Transcript: 

00:00

Back to School is a special time for both kids and teachers. But no matter how long you have been teaching, it's still a lot of work: from classroom setup to figuring out your systems and routines and all of the back to school meetings. In addition, you must figure out lesson planning specifically for those first few weeks somewhere in the mix and still make it meaningful. With that in mind, in today's episode, I will share five STEM activities you can use in your K through Five STEM classrooms. 


01:02

With any Back to School activity, you want to ensure that it has a low entry point where students can be successful no matter how they participate. These activities are still academic, but the goal is to help students warm up to the space, you, and their classmates. In turn, many of these activities I will be sharing with you have an element of collaboration to help build classroom community, which is important in any classroom setting. Now, let's jump into those five STEM activities to try. 


01:33

This first one is great, especially if you teach all the kids in the school as I do. This activity is a way to make introducing the rules in your classroom more hands-on and engaging. So instead of you just standing up there and presenting the classroom rules, this will be a fun one for your kids. 


01:56

So first, quickly introduce what your classroom rules are. You're not going to explain all of them in detail. Just read through the rules and show them to your students. When sharing your classroom rules, a great tip is to have pictures and words. Again, just like when you label all of your Makerspace supplies that we talked about in past episodes, you want to have your classroom rules labeled with words and pictures. 


02:19

Once you have this present, either up on your projector TV or printed out, you will have smaller sets of the same rules printed out and cut into puzzle pieces. I made about seven different sets of the same rules. I found a puzzle template online where I layered my rules on top. This was done on the computer. Then I cut out those puzzle pieces beforehand. I printed the seven sets out in different colors, so each table group had a different color. 


02:53

This makes this challenging because all of the rules are cut up and mixed up. The goal is that when students work in teams, either teams they choose themselves or ones that you pick, they will have to put the rules back together. Now, try not to make too many rules. But if you have quite a few rules, maybe about six, cut out about four. That also adds another challenge because if you don't tell them which rules are cut up in their little bags, that will make it even harder. 


03:25

This is a great way for kids to keep focusing on what the classroom rules are. I keep the full images up so they can refer to the image as they are putting together their puzzle. They're always talking about those rules together. So if the rule is tools or materials, not toys, they keep saying that repeatedly. So there is that repetition of my classroom rules. Also, they're learning from the other kids in their groups, discussing it, and figuring out a system that works best for them. 


03:51

I make sure to have a little prize at the end. Something simple like a pencil, a STEM sticker, or something not that cool, but they think it's pretty cool.  After that, whether all the groups have finished or a few have finished depending on how it's going in the class, I will review the classroom rules. Then we'll jump into our lesson for the day. This doesn't take the whole class time, but this is a great icebreaker. The kids are talking and collaborating, learning your classroom rules, and figuring you out as you go. 


04:24

Now you can do the first activity and then do this second activity within the same day. All you need are just a basic bucket of mixed LEGO bricks and the all about me LEGO build. This is a fun one. It's a cool way to get a get to know you to be hands-on, and all students can participate. For this activity, think of questions you can ask kids that are pretty general, and all kids can participate. Some examples of questions are: Do you have a pet too? Did you read a book this summer? I recommend staying away from questions such as, where did you go this summer?


04:59

Questions like that might be a little hard for kids if they can't afford to go on trips. So think of things that most kids might be able to do. Did you play in the water? Did you watch a movie? It could be a movie at home or in the theater. Think of questions that most kids can participate in. So think about those main questions and for each question, add in how many LEGO bricks and what color they need to collect. 


04:59

So, for example, if the question is, do you have any pets, grab three LEGO bricks. Make sure to pause as kids are digging in the buckets. I would spread them out around the room. While they're digging in the buckets and finding green LEGO pieces, you could talk about different shades of green.  This one's great, too, because as they search, you can talk to them about their pet or the answer to the question you asked. Kids who might not be able to say yes to that question if it's not true about them can build with the pieces they have on hand. So having a great variety of questions will allow everyone to grab some LEGO pieces and participate. 


06:21

This third activity goes along with one of our favorite questionnaires Rosie Revere Engineer. Now, as a STEM teacher, you probably have a big love for these sweet little characters. You have Rosie Revere Engineer, Ada Twist Scientist, who now has her show on Netflix, which I highly recommend. It's so much fun. Iggy Peck architect and there are some other friends that are in the collection. 


06:36

So after you read this story with your class, you can have a class discussion about things that fly. Rosie Revere is trying to build a flying machine for her great Aunt Rose. She keeps trying and failing. Finally, she figures out an invention. So, as a class, you can talk about different things that fly in the sky after reading the story. It could be animals, machines, or made up things. Talk about those things that fly, and then students can plan and brainstorm their type of flying machine. It could be real or imaginary. 


06:36

From there, you can provide them with different Makerspace materials. It could be limited supplies that they could build with, such as popsicle sticks, tape, small cups, or whatever you have on hand. They can use cardboard or LEGO bricks. If you don't have many Makerspace materials, you could use those non-consumable items, and students can build their flying machines. 


06:36

If you want to get even more creative, you could print a little picture of Rosie and her Great Aunt Rose to add to their creation. You can think of ways that students can modify and make their designs even better. This activity can be stretched out for many days. You could have each part of the engineering design process while you read the story and research those flying things. Or, if you want to make it quick, you can skip to that building part. 


06:36

Depending on how long you have had your students and their age, this can be a great activity to jump right into and tie in that STEM and stories connection. Another fun STEM and stories activity you can do with your kids goes along with the book. There Was an Old Lady Who Swallowed Some Books. You could do this for any version of the book, but the one about the books is a good back to school one. 


06:36

So after reading this story with your class, you can have images of all the things she swallows. It is crazy, and some younger classes might even start laughing and think it's weird. I did have a Kindergarten class say that this is a weird book.  You can do a lot of different things. 


06:36

The students can build the different things that the old lady ate, make an old lady's mouth, and feed her everything she ate in order of the story. They can get creative with how they build those items using whatever types of materials you want them to use. You can even print out those pictures. You can add robots during your first month with kids if you're brave enough. I'm not brave enough, but maybe you are! 


06:36

You can have those pictures, and kids can code to the different images of the things she ate in the story's order or in whatever order they choose. They can also build the items using pixel blocks. I like to use Bloxels. Now, Bloxels are a little bit expensive. There is a separate subscription that you can purchase where kids can create their video games using the box. I love the blocks because they come on a big grid with tiny cubes. The kids can build pixel art with it. So you can have the images up, and students can build the different things in the story. This could be an opportunity for the kids to have station rotations your first couple weeks with you. So this is a cool and engaging way to take the story further and add many hands-on elements. 


06:36

This last STEM back to school activity for you to try is a digital option that I recommend for second grade and up. It is called apps about me. You can create a slide deck for students that have different phone outlines. On each outline, there's a different app, a fake app. We're not coding on this one, but a fake app that students can create and get to know more about each other. Again, this can be something you can do in one day or have a different slide each day. You could print this out if you don't want to go digital. The reason why I would keep it digital is so that you're not printing a million things. Depending on the platform you're sharing it with, whether it's seesaw, Google classrooms, or Schoology, you're allowing students to practice logging into the platform that you will be using in class, navigating that platform, and using the tools within it. Once they log in, it's pretty self-explanatory what they need to work on. 


12:28

It's not a super high overarching hard task. It's fun because they get to share about themselves differently. Once they're logged in, include a slide where they have the front pages and pictures that go along with their favorite things like favorite animals and color. There can be another slide showing the map app, and they must create a map of their favorite space school, restaurant, or bedroom. You can think of five different things that relate to real life apps. It's a way for students to share about themselves. 


13:01

Now you can have them share creatively, whether it is in seesaw and creating a voice-over about it, or they can work in small groups and share their favorite slide. You can work on this fun activity all week or as a fast finisher. If you're doing a separate project like I do STEM survival camp, which I discuss in episode four, I assign this apps about me activity, so if they finish the part for the day, they have something else to work on. Again, I've had the kids for a few years, so they're used to what platforms I use already and are a little more independent. This is a fun digital option that you can have kids design digitally. 


13:42

As a recap, here are the five back to school STEM activities we discussed in today's episode. First is the classroom rules puzzles. Second, the all about me brick build. Third, the STEM and stories activity with Rosie Revere Engineer. Fourth, the STEM and stories activity with There Was an Old Lady Who Swallowed Some Books. Fifth, the digital apps about me activity. I have all of these linked in my show notes for today, Naomi meredith.com/episode7, where you can see pictures of these activities in action and grab all the links to save time with your back to school planning. Thank you so much again for joining me on today's episode, and I will chat with you soon.

back-to-school-stem-challenges

back-to-school-stem-challenges

back-to-school-stem-challenges

Related Episodes/Blog Posts:

Connect with Naomi Meredith:

STEM Favorites that You’ll Enjoy: 

More About your host, Naomi Meredith

Naomi Meredith is a former classroom teacher turned current K-5 STEM teacher and coach. Her role not only includes teaching over 500 students in her school, but also leading professional development and co-teaching with teachers to help them integrate STEM & Technology.

With over a decade of experience along with a M.Ed. in STEM Leadership and STEM certificate, she helps teachers navigate the best practices, strategies and tools out there.

She truly believes that any teacher out there can learn how to use STEM & Technology in their classrooms effectively. She can’t wait to connect with you and be your guide!

More About The Elementary STEM Coach Podcast

Are you tired of scrolling online for your next great STEM lesson? Do you feel like there is no time to plan, research and test meaningful STEM lessons, so you throw together a hands-on activity and hope that it works? What systems and routines should you set in place to help students be creative, critically think, and collaborate? 

The Elementary STEM Coach is a podcast for K-5 STEM teachers, classroom teachers, GT specialists, and homeschool parents looking for actionable STEM solutions. Each week, Naomi Meredith will share tools, resources and lesson ideas that are actionable in your classroom and create highly engaging experiences with your students. You’ll learn systems and routines that will create control in the chaos and that will keep you organized all year long. 

Your mindless scrolling days are over! Your new STEM-best friend is now here in your ear buds!

station-rotation-ideas

Must-Have STEM Station Rotation Ideas

Must-Have STEM Station Rotation Ideas

station-rotation-ideas

What are some great station rotation ideas? How can your planning be streamlined?

In previous blog posts, we discuss why you need a station rotation in STEM and tips for classroom management. 

You can also grab a FREE STEM Rotation Planning Guide HERE

STEM Station Blog Series

Tips for Planning STEM Stations

Keep station planning meaningful and purposeful. With the ideas listed below, students can experience many different STEM concepts within two, 45 minute classes. 

With a 4-station model, plan around the acronym STEM. Have each station correspond with each letter; Science, Technology, Engineering and Math. 

Also, have a mixture of no-tech and tech options. This will help keep students’ interest while also not having students on a screen the whole time. 

One of the stations can also be teacher-led. This is a great time to lead a small group and teach a skill, revise work from a project, or go deeper into a concept. Add a teacher-station in once classes are able to be independent during work time. 

Below are ideas when getting started, for both primary and intermediate elementary students.  

 

This post contains affiliate links. When you purchase through the link, no extra cost to you, but I receive a kickback from purchases. 

stem-learning-stations

Station Rotation Ideas | ‘S’ for Science

  • Epic! Books create a book collection where students can read about the related science topic to bigger projects
  • Make observations for a science experiment
  • Test solutions for a science experiment
  • Explore STEM concepts using Gizmos
  • Code using cards related to science concepts (Example: predator & prey)
  • Notice animal behavior & take notes using live web cams like San Diego Zoo

stem-learning-stations

Station Rotation Ideas | ‘T’ for Technology

station-rotation-ideas

Station Rotation Ideas | ‘E’ for Engineering

Primary Ideas

  • Engineer Inspiration Boards
  • Pixel Art/Bloxel Boards
    • Run a Google Search ‘Pixel Art of____’ to get different ideas to print out to inspire students
  • STEM & Stories
    • Read the story to the whole group, students complete building challenge at this station


Intermediate Ideas

station-rotation-ideas

Station Rotation Ideas | ‘M’ for Math

  • Tangrams
    • Virtual or using manipulatives. Can Google Search different puzzles to use with students
  • Osmo Genius Kit
    • Tangrams, Words and Numbers challenges. There are different kits for iPad & Kindle Fire, so make sure to double check which one is being ordered before purchasing. 
  • Collecting measurements from a previous challenge
  • Apply new vocabulary in a hands-on way

Station Rotation Ideas | Starter Kits

Want to get started with STEM Stations right away but short on time? 

I’ve put together a STEM Starter Kit that you can use in your classroom. There is an option for primary (K-2) and intermediate (3-5). 

In each set, there is an activity that corresponds to each letter of STEM; Science, Technology, Engineering and Math. 

As a bonus, you will also receive STEM vocabulary posters. There is also a digital version that can be used to type student names to keep track of who is at each station. 

station-rotation-ideas

station-rotation-ideas

Primary STEM Station Bundle Activities 

station-rotation-ideas

Intermediate STEM Station Bundle Activities

 

Other Blog Posts You Might Enjoy:

station-rotation-ideas

What questions do you have about these activities? Feel free to direct message me on Instagram, @naomimeredith_ and I would love to chat with you!

More About the Author, Naomi Meredith

Naomi Meredith is a former classroom teacher turned current K-5 STEM teacher and coach. Her role not only includes teaching over 500 students in her school, but also leading professional development and co-teaching with teachers to help them integrate STEM & Technology.

With over a decade of experience along with a M.Ed. in STEM Leadership and STEM certificate, she helps teachers navigate the best practices, strategies and tools out there.

She truly believes that any teacher out there can learn how to use STEM & Technology in their classrooms effectively. She can’t wait to connect with you and be your guide!

 

classroom-management

Tips for STEM Classroom Management During Stations

Tips for STEM Classroom Management During Stations

classroom-management

You’re ready to start stations in your classroom, but what about the classroom management during stations? 

In the previous blog post, we discuss why you need a station rotation in STEM. Click here to read.

Classroom management of stations is essential for students working the whole time, using materials correctly, and trying new experiences.

Also having students in small groups can help with social distancing and using materials that you may only have a limited amount on. 

Click HERE for your free STEM Station Rotation Planning Guide.

STEM Station Blog Series:

classroom-management-during-centers

Classroom Management During Stations | #1 Teach Station Expectations

Be very explicit in expectations as to what will be accomplished at a station. The goal is to have students be independent during this time, so keep directions 1-3 steps.

 

Typically, I’ll host 4 stations that students will rotate through over the course of two days, 45 minute classes. When factoring in explaining the stations and clean-up in between, each station is around 15 minutes long. Students complete two stations a day. 

If needed, post station expectations where it’s located. For example, when my primary students are using Bee-Bots, I have the expectations on how to use those near the station (after we go over them of course!). 

classroom-management-during-centers

Classroom Management During Stations | #2 Simple Materials

To help with the independence and clear expectations, keep station materials simple. Having limited items will help students get to work quicker as well as the clean up. 

When using Osmos, I have the iPads set up, the app ready on the screen, and the corresponding pieces open and ready. It’s very clear for the students what materials they will need and which app they will be using to get started. 

classroom-management-during-centers

Classroom Management During Stations | #3 Kid-Accessible

Everything needed at the station should be kid-accessible. Unless it’s a teacher-led station, students should have easy access to all of the materials needed for the task. 

 

Students shouldn’t be relying on the teacher to grab materials for the station time. This hinders independence.

Have a designated area in the room where all required materials are set up. If it’s not possible to leave materials out in between classes, have previous classes help set it up before they leave. Or often, I’ll add items to stations while the previous class is in their clean-up stations. Use that time wisely and creatively. 

station-rotation

Classroom Management During Stations | #4 Use a timer

Use a timer that the class can see. It shouldn’t be a mystery for students how much time they have left to work. Especially for students who have a hard time with transitions.

Some students will want to keep working at their station and not switch. Having a visual timer can help all students prepare for the next steps and what they can accomplish in the given time frame. 

 My favorite timer is Classroom Screen. It’s free to use and there are other widgets that can be used on the screen in conjunction with the timer. 

 If students feel that there isn’t enough time at their station, consider repeating the stations again. Switch out some of the activities slightly, but keep the same format. 

station-rotation

Classroom Management During Stations | #5 Keep track of kids

If you are teaching within a specials rotation, or even if stations are in your regular classroom, keeping track of where the kids are is super important.

Trust me. 

Someone might be absent one day, get pulled for a group… really anything! Simply write the names of the kids in the group on the whiteboard or on a station rotation digital chart.

 This will ease headache and arguing as to who completed what station. 

Classroom Management During Stations | #6 Clean Up Completely Before Rotating

This step is one of the most important. Students need to clean up fully before rotating. I’ll tell students, “Clean up and stand at your clean station.” 

 I’ll walk around to each group and ensure all the materials are put away and correctly. This is also the time if students need to wipe down and clean pieces with cleaning wipes. 

For younger students, here is the process I use:

  • Timer goes off
  • “Clean up and stand at your clean station.”
  • Students clean up, teacher walks around to stations to ensure things are being put away correctly
  • When cleaned, student stand at clean station
  • Teacher checks all stations one more time
  • All stations clean
  • Teacher says, “If you are at the Technology station, raise your hand!”
  • Students at station raise hand
  • Teacher says, “Please point to the Engineering station”
  • Students point, don’t move yet
  • Teacher says, “If you are at the Engineering station, raise your hand!”
  • Students point, don’t move yet
  • (Use same process for all stations) Once every student is pointing to next station, they will walk to new station

 

This may seem annoying at first, however, these explicit steps will help ensure materials are put back where they need to be. This also helps students learn to be respectful of the space and the tools at hand. 

 

Classroom Management During Stations | Let Me Help You Plan!

Planning out your STEM Rotations doesn’t have to be difficult. Click here to grab your FREE STEM Rotation Planning Guide. Inside are templates and ideas to get you started with implementing your first round of STEM Rotations!

Don’t forget to grab your FREE Guide before you go!

 

Other Blog Posts You Might Enjoy:

classroom-management

What questions do you have about starting STEM Stations in your room? Feel free to direct message me on Instagram, @naomimeredith_ or send me an email, contactnaomimeredith(at)gmail.com, and I would love to chat with you!

More About the Author, Naomi Meredith

Naomi Meredith is a former classroom teacher turned current K-5 STEM teacher and coach. Her role not only includes teaching over 500 students in her school, but also leading professional development and co-teaching with teachers to help them integrate STEM & Technology.

With over a decade of experience along with a M.Ed. in STEM Leadership and STEM certificate, she helps teachers navigate the best practices, strategies and tools out there.

She truly believes that any teacher out there can learn how to use STEM & Technology in their classrooms effectively. She can’t wait to connect with you and be your guide!

spring-stem-activities

5 Spring STEM Activities & Technoloy Lessons You Need Now

spring-stem-activitiesThe end of the school year is the best time to experiment and try new things with your students. Here is a list of 5 Spring STEM Activities & Technology lessons that your students will love!

This post contains affiliate links. When you purchase through the link, no extra cost to you, but I receive a kickback from purchases. 

 

#1 Spring STEM Activities & Technology Lesson: STEM & Stories

Integrate your favorite Spring stories with a fun STEM challenge. Try these two STEM & Stories lessons for After the Fall by Dan Santat and The Very Hungry Caterpillar by Eric Carle.  

 

After reading the story, integrate a STEM challenge to help build comprehension. Build a wall for Humpty Dumpty to sit on to keep him safe. You can read more about how to teach this lesson by clicking here.

spring-stem-activities

 Reading The Very Hungry Caterpillar? Code the robot version of the caterpillar to collect the food in the order that he eats it. In addition, have students create the food to fit the mouth of the the cardboard version of the caterpillar. You can find the entire lesson plan here.

spring-stem-activities 

#2 Spring STEM Activities & Technology Lesson: Digital Interactive Notebooks

Cutting and pasting paper is wonderful but can definitely get an upgrade. Try these digital interactive notebooks. With this format, students can learn content by building their technology skills at the same time. Read here how these can help with remote learning as well!

stem-activities-for-spring

 My 3rd graders loved having access to colorful websites from National Geographic Kids and listening to engaging podcasts from Brains On! which were added to the notebooks. 

 

Diagrams and places to keep track of butterfly or ladybug science observations are also provided. This was especially helpful when we were keeping track of the ladybug life cycle daily! By the way, I had NO CLUE that ladybugs have a similar life cycle to butterflies. The things we learn while teaching! Here is the kit we used to see the ladybug life cycle in action.

stem-activities-for-spring

#3 Spring STEM Activities & Technology Lesson: Engineer Inspiration Boards

Create objects that represent the Spring months with these Engineer Inspiration boards. By using any items available in the classroom or at home, create the different objects presented on the board. 

stem-activities-for-spring

 

These boards can be printed in color or black & white. Digital versions are also available and can be shared on any platform of your choice with students.

#4 Spring STEM Activities & Technology Lesson: Digital Reading Comprehension Worksheets

Mix up your reading comprehension routine with digital versions of the worksheets that you might be using in class. Use books, articles and websites that you already have on hand and use. 

 Just pop these comprehension worksheets into Google Classroom or Seesaw. Track students’ comprehension of the text while also embedding important technology skills. 

Need help with Google Classroom? I have a FREE 3 part video series that will help you with:

stem-activities-for-spring

#5 Spring STEM Activities & Technology Lesson: Coding & Multiplication Facts

This low-prep STEM station has high engagement and is perfect for multiple grade levels. Use your favorite robot to practice multiplication facts. Don't have robots in your classroom yet? Check out my top picks that are high-quality that I truly believe in and work well with kids. 

stem-activities-for-spring

With this station, there are three ways to play!

  • Code & write the equation
  • Code, write & keep the card
  • Coding Math Fact Memory

spring-stem-activities

Which Spring activity above have you tried? Which one are you wondering more about? Feel free to direct message me on Instagram, @naomimeredith_ and I would love to chat with you!
Want more resources to support Technology & STEM all year long? Grab this FREE downloadable guide that I’ve put together for you!