Which 3D printer should I ask my principal for? [ep. 222]

Which 3D printer should I ask my principal for? [ep. 222]

Check out the full episode on which printer should I ask my principal for:  

 

Subscribe to the podcast HERE on your favorite podcasting platform.

Episode Summary

Thinking about buying a 3D printer for your elementary STEM classroom but not sure which one to choose? With so many brands, features, and price points available, finding the right 3D printer for your school can feel overwhelming, especially if you’re just getting started!

I’m sharing the questions I ask when choosing a 3D printer for the classroom, along with my favorite brands and recommendations for 2026. Whether you’re requesting funding from your principal, writing a grant, or planning your STEM budget for next school year, this episode will help you make a more informed decision.

Resources Mentioned:

Episode Transcript

Welcome to the Elementary STEM Coach Podcast. I’m your host, Naomi Meredith, a former classroom teacher turned K-5 STEM teacher and coach. With over a decade of experience teaching and a master’s degree in STEM leadership, I’m here to coach you throughout the year to help you gain back more time to create innovative experiences for your students.

This episode, I think you’re going to find really helpful as you are getting into the budgets for this school year, or even going into next school year and planning what you can buy. And you’re probably asking this question, which 3D printers should I ask my principal for? This can definitely be forwarded to your principal. I’m going to give you some guiding questions that I ask myself when I’m looking at 3D printers, because printers are always changing.

There are a lot out there. Not all of them are made for beginners. Not all of them are great for a school setting.

So I’m going to tell you what I look for, what I’m currently using, and some recommendations as well that are current at the time of this episode. None of the printers that I am talking about, I’m sponsored by at the time of this as well. I will put in some affiliate links that you’re welcome to shop through, but this is just based on my own opinions and research to help you out in this big purchase decision.

While you’re at it, make sure to go and download my free 3D printing station that works with any 3D printer you have in your classroom. And this is the exact system and routine that I use when I’m organizing student prints. So they are all finished with their projects.

This is how I keep track of all of their prints, who’s printing currently, whose is finished, and whose is coming up next. So I still use this to this day. I’ve been using it since 2018, and I think you’ll really find it helpful.

The first question that I ask myself when I’m buying a 3D printer for the classroom is, how many do I need? So if you don’t have one, one for sure. Definitely get one. I had two printers, and I taught 600 plus students in K-5 STEM.

There were four classes per grade, and two printers was plenty for me. In my mind, more machines, more problems. I think having up to four, that would be lovely, especially now that I have more experience with 3D printing.

I would actually want four of the same, or four of the same brand, because then I can use the same software with all of them, which we’ll get into. One for sure. Two is great, because if you’re troubleshooting one, hopefully the other one works.

So that’s where my head is at. Yes, if you have more printers, you can print more, but think about, that is more management. You have to get all the prints lined up to go on those printers.

So if you’re especially new to this, for sure, two. When you’re thinking about the cost of your printers as well, maybe your school’s going to buy for you, your PTO, the school district, maybe you’re hoping to write a grant or two, definitely add in the cost of filament. So filament is the plastic, typically plastic, that you print the design in.

Filament is becoming more and more affordable, same as printers, but I’ve noticed a lot of printers work better with their name brand filament, and if they don’t have a name brand filament, they often have recommendations that work the best, and some printer, and some filament brands also partner with 3D printing companies, and they work well with each other. So don’t worry about that too much yet. Most filament is around the same cost these days.

You’re most likely going to be using PLA, the most basic type of filament, but this is something to keep in mind, not only for the current year when you’re buying your printers, but also do you get money or funds for years to come, because you do need to take care of the filament, especially if you live in humid locations. The filament can hold moisture. I live in Colorado, so I don’t have that issue.

I might even have the opposite issue. It might dry out a little bit quicker. So I do keep my filament in some zip seal bags when I’m not using a specific color.

Along with thinking about the amount of printers that you might need, the next question I ask myself is, which grades am I going to do 3D printing with? I do 3D printing with grades K through 5, and I know that it’s possible, and I know that it works, and I have a collection of lessons that I’ll link below that work with students in grades K through 5, depending on what platform you’ll use, but if you’re really intimidated by that, and again, if you’re first getting started, second or third grade can be a really great sweet spot to start, and especially if you’re using Tinkercad to design. That is my preferred platform, my number one platform to use with students when designing 3D prints, then yeah, second or third grade is a great place to start. Also, don’t worry too much about the software for designing.

A lot of 3D printers will come with their own software that you could design in. Some of them are AI based, which that’s a whole other thing. I’m not going to get too into that.

I don’t really worry about the design software that comes with a printer in terms of using it with students. Tinkercad is great. It’s free to use.

It teaches them the basics of how things fit together. You can do a lot in Tinkercad, and you can download the print files that will work with pretty much every printer, so don’t worry too much about that side. The next question I like to ask is, am I planning on printing other things besides student projects? And I think you should say yes to this question.

This is an area I’m actually diving into more of myself now that 3D print files are becoming more accessible, easy to search for, and there’s just some fun designs out there that people have gotten really creative with. And even I’m designing my own prints for the classroom instead of buying certain things. For example, I had a project for teaching rocks and minerals, and the kids were going to be sifting sand to find the rocks and minerals that were in the sand, and I didn’t want to buy a bunch of sand sifters.

I did have time to print, and not only did I have time to print my own sand sifters that were the size and everything that I wanted in a sand sifter, I designed them myself. So that is pretty cool too, where maybe you need specific manipulatives and you don’t have the budget to buy. That can be really convincing for a principal for you to get at least one 3D printer, because maybe you can print things for your classroom that can help out with a budget anyway.

Just lots of different things, like I printed pumpkins that I needed for a challenge I could use over and over again, and I didn’t have to go out and buy candy and worry about allergies. So that’s a whole other thing as well. So maybe get two printers, one for student projects, one for other things that you’re printing.

The next question to ask yourself is, do I want to print in multi-color? Multi-color is when your actual 3D print is printed in more than one color within that print process, and the colors are typically fused together. So that’s a really cool option, but it’s also not very necessary. It’s very fun to have.

I’ll do multi-color sometimes with students. The multi-color does take a lot longer, depending on how the print is designed. So you definitely want to save extra time to print those, or just know that maybe only fifth grade does a project like this.

I often just print things in one color, usually white, which I talked about in my last episode. And I have kids color with paint markers, because if you’re printing a lot of projects at once, and you’re trying to get these prints complete for classes, the multi-color might not always be the best option. But like I said, it’s fun to have.

Next, when you’re deciding on a printer, is to figure out how do I send the prints to the printer. If you are designing in Tinkercad, there’s not a button that says print, send it to my 3D printer. It’s different than paper printers.

So the kids would design in Tinkercad. Then you have the middle software, the slicing software, that will take that file that was created, slice it into layers, and then send it to your printer. That is the software the students are typically not dealing with.

You could teach your older kids. I don’t think there’s anything wrong with that. But most likely as an elementary teacher, you’re doing that stuff.

Most softwares that are talking to the printer are wireless, meaning I don’t have to hook up my computer to the actual printer. I have had printers like this in the past when they were first coming out into schools. But typically it’s wireless.

Now some school internets are more strict about what you can and can’t connect to. And some, for some reason, have limitations connecting to the Wi-Fi. So do a little bit of research about that specifically.

Maybe even reaching out to the company or your district or a tech team if they have information. But some printers have an LCD display screen where you can actually click on options and even print files from the actual 3D printer. Maybe you can hook in a flash drive, which is kind of nice, where you get everything sliced, everything ready to go.

On the flash drive, you plug it into your printer. You don’t even have to deal with the wireless situation. I also have a current printer right now that was sent to me that doesn’t have an LCD screen.

I have to download the mobile app on my phone and talk to the printer that way, which is a little bit annoying. I prefer using it on a computer. Some of the software you have to download on your computer, some of it’s web-based.

So they’re all different. They all try to be the best. Again, they all have their quirks too.

So that is super important to know. I prefer the computer. I think it’s just easier to get it all done in the way that I do it when I download all their files into one folder for their class.

And it’s on my desktop and it’s all ready to go. I think it’s just more efficient. This is an interesting question that might help you make your decision, but are there printers in my school district that are recommended? Some school districts are so big that some schools will start buying a certain brand, and then other schools start catching on, oh, this brand, I heard about it.

Sounds like it’s working for you. I’m going to buy it too. And then many of the schools will have the same type.

Or maybe you and some other teachers are trying to decide together what 3D printers you should buy. So maybe if you and other teachers at other schools kind of all decide on the same one or same brand, maybe you can get a bulk discount. That could be a possibility.

You never know. A lot of the times some of these companies are willing to work with schools. Knowing other teachers have the same printers as you can definitely be helpful because when there’s that troubleshooting, you will have troubleshooting.

You cannot avoid that. And thinking of new projects and the capabilities of your printer, it’s just nice knowing specific people who have that device that you can talk about it with. So what printers should you be looking at? Here are some current brands and printers that are definitely worth looking into.

Here in 2026, when I am recording this in November, this can definitely change over time. And that’s why I’m here, because I can create more podcasts. First, check out Bamboo Labs.

That is what I have. I have a Bamboo P1S and I have the AMS system on top. So that is the system that can stack and have four colors where my print could technically have four colors.

But I can also feed the filament through the back and just do one color, which is what I’m currently doing right now, printing some Christmas trees. The AMS system on this isn’t much more expensive. So just get it and then you have it as an option and you don’t have to use it all the time.

It’s just nice to have. What I like about it is it’s pretty quick. It’s pretty accurate and can do really precise designs.

I also like that it’s enclosed where it has a door and the kids can’t touch anything. And that is something I look for in printers, because the little ones just want to touch it. So just having a door just really helps so they’re not putting their fingers onto the actual machine.

There are other Bamboo Labs printers, the A1 Mini, I know a lot of teachers have. There’s also an A1. This works for them.

It can be more affordable. It can do more colors. It is a smaller print bed.

I also wanted a bigger print bed, but budget wise, great. And you can also use the same slicing software. They all use the same software.

So if you have multiple bamboos, but different styles, but you have the same software, that can make management way easier because you’re just clicking which printer it sends to and you’re not clicking in and out of slicing softwares. Another brand that is also super popular with schools are Flashforge and they also have some multi-color options. If you just want to do one color and you’re like, I don’t really care.

Their adventure looks like it’d be a really good option and very affordable. So you just want to stick with one color. You don’t want to get to multi-color.

That could be an option for you. And they had a couple different options as well for multi-color that were at a reasonable price point. That looked pretty good.

Two were about the same. They have like the same name. One I think is their newer model.

So it was like a hundred dollars more, but those looked like those could be some good options as well. And another brand you may or may not know about, I chatted with them at ISTE this summer, is Prusa, P-R-U-S-A. They have a couple options, a little pricier, but they actually have a good reputation with 3D printing.

Maybe they haven’t been in schools as long. I’m not quite sure, but they have the MiniPlus and a different model, an MK4S. So you might be seeing printers out there.

They’re thousands and thousands of dollars. I would say those are for like people creating prototypes, hobbyists, more advanced 3D printing classes who are in the high school setting. In an elementary setting, I think you need something better than a home printer, like a getting started printer, which I have played around with those and they’re fine.

The slicing software has turned me off because it’s hard to manage and I don’t like doing it on my phone as a teacher, but having something that is a little more robust in that slicing software side, like these options, can really help you get organized and get those projects done in the elementary setting. Everything will be linked in the show notes for you, and I hope that these questions help you really think critically and really get you thinking about what printer you should have in your classroom and help you make that right decision. Thank you so much for listening to today’s episode of the Elementary STEM Coach Podcast.

I would love to connect with you over on Instagram at Naomi Meredith underscore, or send me an email to elementarystemcoachpodcast at gmail.com. Also, make sure to check out my website, NaomiMeredith.com to see all the show notes from today’s episode and shop my K-5 STEM resources. Any questions you have, needs for resources, or ideas for episodes, get in touch. I’ll talk to you soon!

 

 

 

 

Related Episodes/Blog Posts:

Connect with Naomi Meredith:

 

More About your host, Naomi Meredith

Naomi Meredith is a K-5 STEM educator and business owner in Colorado supporting elementary teachers world-wide navigate the best practices, strategies and tools out there. With over a decade of experience teaching, 5 years teaching elementary STEM, along with a M.Ed. in STEM Leadership and STEM Certificate, Naomi helps teachers world-wide to navigate best practices, strategies and tools out there.

She offers a variety of tools to help teachers feel successful teaching STEM to their elementary students through lesson plans, online courses, coaching and speaking events.

She truly believes that any teacher out there can learn how to use STEM, innovation and hands-on learning in their classrooms effectively. She can’t wait to connect with you and be your guide!

More About The Elementary STEM Coach Podcast

Are you tired of scrolling online for your next great STEM lesson? Do you feel like there is no time to plan, research and test meaningful STEM lessons, so you throw together a hands-on activity and hope that it works? What systems and routines should you set in place to help students be creative, critically think, and collaborate? 

The Elementary STEM Coach is a podcast for K-5 STEM teachers, classroom teachers, GT specialists, and homeschool parents looking for actionable STEM solutions. Each week, Naomi Meredith will share tools, resources and lesson ideas that are actionable in your classroom and create highly engaging experiences with your students. You’ll learn systems and routines that will create control in the chaos and that will keep you organized all year long. 

Your mindless scrolling days are over! Your new STEM-best friend is now here in your ear buds!

Leave a Reply

Your email address will not be published. Required fields are marked *